Brad Sherriff — Full Aero Package (Time Attack)
CNC Active Bespoke
Contract value
$32,000
Est. cost
$12,800
Margin
60%
Due
10 Oct 2026
Customer
Brad Sherriff Racing
Owner
Tom R
Qty
1
Station
CNC
Splitter, wing, diffuser + mounts.
Pre-machining design check
Verified against the mould / chassis jig before any carbon is cut.
| Check | Nominal | Actual | Tol | Result |
|---|---|---|---|---|
| Wing pillar bolt patternOK. | 120.0 mm | 120.0 mm | ±0.3 mm | Pass |
| Diffuser strake spacingOK. | 65.0 mm | 65.0 mm | ±0.5 mm | Pass |
Materials against this job
Consumed cost $1,285| Material | Lot | Qty | Waste | Cost | State |
|---|---|---|---|---|---|
| CF-TW-210P Carbon Twill 3K 210gsm Prepreg | LOT-PP-2609 | 10 m² | 0 | $890 | Allocated |
| HW-TICAP-M8 Titanium Cap Head Bolt M8 | — | 18 ea | 0 | $83 | Allocated |
| CF-SATIN-193 Carbon Satin 5HS 193gsm | LOT-CF-2606 | 6 m² | 0 | $312 | Allocated |
Workshop routing
- ✓ Design & ply bookDesign · 9/10h Done
- 2 CNC mould/patternCNC · 6/14h Active
- 3 Layup & debulkLayup · 0/20h Pending
- 4 Cure (oven)Oven · 0/8h Pending
- 5 Finishing & clearFinishing · 0/10h Pending
- 6 QA & sign-offQA · 0/4h Pending
Progress34%
Activity
No activity yet.