Xtreme GTR — Front Splitter, Canards & End Plates (WTAC 2026)
Layup Active Bespoke
Contract value
$18,500
Est. cost
$7,200
Margin
61%
Due
02 Oct 2026
Customer
Xtreme Motorsport
Owner
Dylan M
Qty
1
Station
Layup Bay 2
Full front aero package for WTAC Pro campaign.
Pre-machining design check
Verified against the mould / chassis jig before any carbon is cut.
| Check | Nominal | Actual | Tol | Result |
|---|---|---|---|---|
| Splitter leading-edge radiusMatches mould. | 6.0 mm | 6.0 mm | ±0.5 mm | Pass |
| Canard mount hole pitchOK. | 88.0 mm | 88.0 mm | ±0.3 mm | Pass |
Materials against this job
Consumed cost $1,939| Material | Lot | Qty | Waste | Cost | State |
|---|---|---|---|---|---|
| CF-TW-210P Carbon Twill 3K 210gsm Prepreg | LOT-PP-2609 | 14 m² | 1.8 | $1,246 | Drawn |
| CF-SATIN-193 Carbon Satin 5HS 193gsm | LOT-CF-2606 | 8 m² | 0.9 | $416 | Drawn |
| RES-EPX-INF Epoxy Infusion Resin | LOT-RS-2610 | 4.5 kg | 0.3 | $162 | Drawn |
| HW-TIBTN-M8 Titanium Button Head Bolt M8 | — | 24 ea | 0 | $115 | Drawn |
Workshop routing
- ✓ Design & ply bookDesign · 7.5/8h Done
- ✓ CNC mould/patternCNC · 11/10h Done
- 3 Layup & debulkLayup Bay 2 · 9/16h Active
- 4 Cure (oven)Oven · 0/6h Pending
- 5 Finishing & clearFinishing · 0/8h Pending
- 6 QA & sign-offQA · 0/3h Pending
Progress62%
Activity
Advanced to Layup — carbon & resin drawn from stock.
Dylan M · 14 Sept, 09:12 am
Design check PASS — all items within tolerance.
Tom R · 06 Sept, 11:20 am